[linrad] svgalib problems (fwd)

[jmh5@xxxxxxxxxxxxxxxx>]

Hi Conrad,

   I was able to solve most of my SVGA (went from crashing to
working) problems by tweaking:

   /etc/vga/libvga.config

   Hope this helps :)

   john NI1B

---------- Forwarded message ----------
Date: Sat, 4 Jan 2003 17:40:10 -0000
From: Conrad G0RUZ <conrad@xxxxxxxxx>
Reply-To: linrad@xxxxxxxxxxxxxxxxxxxxx
To: linrad <linrad@xxxxxxxxxxxxxxxxxxxxx>
Subject: [linrad] svgalib problems

I am having problems with svgalib on both of these latest machines Machine 1
(Athlon 850) has an ATI Rage 128 (32Mb)and runs quite happily in Windows at
1024 x 768 @ 100 Hz. When I run Linrad I get the S screen ok, I can select
my mouse acceleration ok but when I select Mode 12 for the screen (1024 x
768) the machine immediately crashes. Machine 2 which is a P3-450 and has a
ATI Rage Mach 64 chip (8mb), this is an onboard video and I did anticipate
some problems. I can get to the initial screen which has white horizontal
bands across it. I can also go into mode A which works but still has these
bands across it, I also cannot toggle the oscilloscope on/off (and I DO know
how to do this hi). If anyone has successfully used either of these cards
then I would like to know what you did to configure them to run with svgalib
correctly. One other strange thing with machine is that when I try mode S or
T the machine crashes.

Any ideas?

Conrad G0RUZ




LINRADDARNIL