[Linrad] Re: Linrad-03.06 SDR-IQ FT245 Solution

["Thomas D. Dean" <speakeasy.org; tomdean@xxxxxxxxxxxxxxxx>]

On Tue, 2009-05-26 at 09:54 -0700, Thomas D. Dean wrote:

> The instructions discuss creating a file /etc/modprobe.d/sdriq the name
> should be /etc/modprobe.d/sdriq.config or it may fail in future
> releases.

I am doing very good on this subject.  Another typing error, thing
configure file and type config, not conf.

The file to create to load the proper driver for the SDR-IQ is
/etc/modprobe.d/sdriq.conf, containing
alias   usb:v0403p6001d*dc*dsc*dp*ic*isc*ip*    ft245
alias   usb:v0403pF728d*dc*dsc*dp*ic*isc*ip*    ft245

If you use a different driver, possibly linrad-ft245, that name should
be in the file, replacing 'ft245'

And, to allow normal user to access the device, create a
file, /etc/udev/rules.d/local.rules containing
# Additional rules for this computer:
    # USB devices
    KERNEL=="ft245?",       MODE="0660",    GROUP="dialout"

Sorry about all the confusion.

tomdean


--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "Linrad" group.
To post to this group, send email to linrad@xxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to linrad+unsubscribe@xxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/linrad?hl=en
-~----------~----~----~----~------~----~------~--~---


LINRADDARNIL